About IP Converter:
YT940 IP Converter accurately provides equipment with relevant air pressure, according to input signal of 4~20mA being delivered from the controller.
- High accuracy and sensitivity
- Simple zero and span adjustment
- Feedback Signal (Option)
- Analog PID Control
- Tubeless connection of YT-200, Air Regulator
- Explosion Proof
- No effect from mounting orientation
YT-940 IP converter receives 4~20mA DC signal from the control room and outputs 0.02 ~ 0.1 MPa
signal to pneumatic-pneumatic positioner to operate a control valve system. YT-940 is designed to be
used in an explosion-proof environment.
2.2 Main Features and Functions
➢ Low air consumption level yields to lower plant operating cost.
➢ A wide range of uses with Type 4X(FM) and IP66 protection grade.
➢ Can be used at low voltage (8.5 V) and can be compatible with most of general controllers.
➢ Polyester painting makes the product strong against corrosion environment.
➢ Easy dial adjustment for Zero and Span.
➢ Modularized inner parts make maintenance easy and simple.
➢ I/P converter operates normally during sudden changes in supply pressure and / or high vibration
➢ Air filter regulator <YT-200 series> can be directly installed without any pneumatic piping.
➢ DA and RA can be set for the output pressure relative to the input current signal by simple switch
➢ DA and RA can be set for the feedback signal relative to the output pressure by simple switch
operation. (Only feedback signal option)