Karachi, Pakistan · Supplying since 2016
Process control instrumentation and industrial equipment, supplied across Pakistan
We supply ASCO, Rotork, Rosemount, YTC and SPDC equipment to plant operators and contractors — positioners, transmitters, solenoid and pulse valves, filter regulators and pneumatic cylinders — with procurement, calibration and technical support behind every part number.
Or call +92 334 3608797 — Karachi Office HQ, 09:00 - 18:00.
Brands we supply
Companies we have supplied
Not brands we sell — plants and mills across Pakistan that A.N Trader has supplied equipment to.
- Dewan Cement

- Thatta Cement

- Power Cement

- Thatta Power

- Al-Abbas Sugar Mills

- Tufail Chemical

What we supply
Equipment categories
A.N Trader deals in the vast supply of industrial equipment across the specialty groups below. Each group lists the part numbers currently carried, with specifications and datasheets where the manufacturer publishes them.
-
Pneumatics
10 productsCompressed-air equipment for valve control and linear motion — positioners, I/P converters, filter regulators and cylinders. Everything in this group runs on clean, regulated plant air.
View category -
Positioners
7 productsDevices that hold a control valve at exactly the position its 4-20mA command signal asks for, comparing the demand against mechanical stem feedback. Covers both analogue electro-pneumatic units and microprocessor-based smart positioners.
View category -
Electro-Pneumatic Positioners
3 productsAnalogue positioners that convert a DC 4 to 20mA control signal into the pneumatic output needed to drive a linear or rotary valve actuator. The Rotork YTC YT-1000 and YT-1050 families sit here.
View category -
Air Filter Regulators
2 productsFilter regulators that drop the plant's main air supply to a stable working pressure and strip particulates out before the air reaches a positioner or other pneumatic device. 5-micron filtration, with an optional relief function.
View category -
I/P Converters
2 productsCurrent-to-pressure converters that turn a 4~20mA DC control-room signal into a proportional 0.02~0.1 MPa pneumatic output for a pneumatic positioner or control device.
View category -
Cylinders
1 productPneumatic actuators that convert air pressure into linear motion, supplied in double-acting form with adjustable cushioning at both ends of the stroke.
View category -
Electrical Items
1 productElectrically operated plant hardware — solenoid operators, coils and the certified enclosures they are supplied in for hazardous areas.
View category -
Instrumentation & Process Control
1 productField instruments that measure a process variable — pressure, temperature, flow or level — and report it to a DCS or PLC, together with the control devices that act on the result.
View category -
Mechanical Items
1 productMechanical plant components and assemblies — valve bodies, diaphragms, fittings and the spare-part kits that keep them in service.
View category -
Pulse Valves
1 productFast-acting diaphragm valves that fire a burst of compressed air down a blow tube to shake accumulated dust off the filter bags or cartridges in a dust-collector system.
View category -
Solenoid Valves
1 productValves opened and closed by an electrical coil rather than by hand, used wherever a control system needs to switch air or fluid directly. Available with waterproof and explosion-proof solenoid options.
View category -
Transmitters
1 productField devices that convert a measured process variable into a standard 4-20mA or HART signal for the control system, including pressure transmitters for differential, gauge and absolute measurement.
View category -
Valves
1 productProcess and utility valves supplied to plant operators across Pakistan, including solenoid-actuated types and fast-acting dust-collector pulse valves.
View category
Selected equipment
Part numbers we supply
A sample of the catalogue, across all five brands. Quote the part number and we will come back with availability, lead time and price for your quantity.
Who we supply
Industries we serve
A.N Trader's supply and services are a complement to today's high-tech industries. The sectors below are the ones the company has supplied from Karachi.
- Oil & Gas
- Sugar
- Cement
- Textile
- Bio Gas
- Pipe & Eternit
How we work
Capabilities
Supply is the start of the job, not the whole of it. These four are what the company does around a part number.
-
Procurement & Sourcing
Direct import and local sourcing against the part number on your tag. Vendor selection, landed cost and lead time are handled as one line item, not three conversations.
-
Calibration
On-site calibration and functional testing of pressure, temperature and flow instruments against traceable reference standards, with certificates issued for your records.
-
Technical Support
Specification checks before you order — smart positioner or electro-pneumatic, fail-open or fail-closed, HART or straight 4-20 mA — and fault diagnosis on loops already in service.
-
New & Refurbished Stock
Where a new unit sits behind a long import lead time, we quote a refurbished alternative alongside it. The Rosemount 3051 series is offered both ways.
Who we are
Why A.N Trader
A.N Trader & General Order Supplier is a Karachi industrial support company, founded in 2016 by Muhammad Abbas, involved in the procurement and execution of industrial products. The company is unique in its dealing in that it believes in teamwork with value-added services to its clients, while being recognised as a quality supplier and service provider.
Our mission is to provide our customers with cost-effective and reliable products, comprising integrated technology, and to be recognised as a leading supplier in the field of process-control instrumentation and automation.
- Founded
- 2016, Karachi
- Brands supplied
- ASCO, Rosemount, Rotork, SPDC, YTC
- Stock
- New and refurbished
- Pricing
- Quoted per enquiry, never published
Free technical consultation
Not sure which part the application needs?
Tell us the process conditions, the tag number, or just the problem you are trying to solve. We will work out what fits — valve and positioner selection, an instrumentation audit, or a spare-parts plan — before anything is quoted.